It isn't as difficult as it seems to replace the shingles of an old roof. It is not difficult to replace shingles on an old roof. We will give you all the information you need.Executive Summary
You will need to have a hammer, screws, prybar, utility knife and roofing felt paper. Also, a caulk gun, wire brush and putty knife are all necessary. To make this job a success, you will need someone to lend a hand. Let's get right in here.
You first need to remove broken shingles.
Get out your hammer and screwdriver and rip off those faulty roof tiles. Don't muck up the nice shingles around the edges. Use the wire brush to clean up any damaged shingles.
To move on to Step 2, a replacement shelle must be cut to the required size.
The utility knife can be used to cut down one of your newly purchased shingles. It is important that you replace a shingle by one with the exact same dimensions.
Finally, secure the new shingle.
Now is the time to install a new roofing shingle. You will need to attach the new replacement with four nails, one in each corner. Don't forget to place some distance between each one.
You can replace all shingles by following Steps 3 through 6 until the job is completed.
After fixing any leaks, replacing any missing shingles and repairing any damage to the roof, you can give your roof some regular maintenance. Examining the roof for top roofing contractor Bloomington IL loose nails, cleaning out the gutters, and cutting back any trees or branches that could touch the (blog) roof are all examples of such maintenance.
Congratulations! Following these steps, you will now have a fully functional roof covering your head. It is essential to maintain your roof for many years. You should check for missing nails and clean out the gutters.